The rubber seal is a circular rubber product, which is generally used by leakage and the physical characteristics of natural rubber. First of all, we need to pay attention not to damage the surface of the sealing part. The sealing performance of the plane sealing depends on the upper and lower end surfaces. Temperature -resistant, corrosion -resistant, aging -resistant graphite, rubber and plastic, fiber and other special materials that are easily damaged.
In addition, it is not forcibly installed. Some seals are placed in a slot -shaped filler letter. At this time, it is necessary to tighten the installation. It should not be rough and brutal during construction. Forcibly installation of the movement is bound to destroy the original prefabricated structure of the sealing parts. It is like a disaster to fill the required parts after crushing the prefabricated concrete. When installing the tight sealing parts, we need to pay attention to balance and symmetry, and place the sealing parts in the place where the effective cover (or lip line) is closely cleaned. After the system is opened and used, further observation and fixing the aftermath of the sealing parts need to be done to prevent the collapse caused by a slight leakage due to changes in the working conditions (such as pressure -blocking) during the system work process.
