1. Solution for the basic layer
The boundary layer should be cleaned, and there is no gray, oil and other blocking accessories. After the bottom wall is tested according to the acceptance, the mixed mortar plaster layer.
2. Pull line construction
According to the facade design scheme and technical standards for the insulation of the wall. During the entire construction process of artificial board and batch putty surface cement mortar, the stainless steel wire suspension is based on the large corner of the house building wall and other necessary areas. It is to better manipulate the external insulation structure of the wall The flatness and peace rectification.
3. Paste board
Before sticking, the layout is made according to the design scheme, the specification model and total of the alien board are clarified, and the black ink line pops up the board position diagram on the basic layer.
4. The screws of the ground foot are fixed
After the screws of the ground foot are fixed, the specifications, parts, total number, total number, fixed deepness and tensile resistance must be in line with the design plan. The chemical bolts are fixed after 2 to 4 hours after the paste.
5. Surface construction
After the fixation does not move the board, check the acceptance of the project and carry out the construction of the surface cement mortar protective layer.
