Two component series polyurethane prepolymer produced by Shandong XinRuiTuo Precision Industry Co., Ltd. can apply to low-hardness rubber rollers, tire filling, mold rubber, industrial casters, etc.

XinRuiTuo is a modern technology company dedicated to the production of polyurethane products. The company integrates scientific research, development, production, sales and service. Our two component series polyurethane prepolymer is usually used to prepare high-performance polyurethane, epoxy resin, acrylate and other polymers. The physical and chemical properties of polymers, such as strength, toughness, abrasion resistance, chemical resistance, etc., can be adjusted by rationally selecting different monomer combinations.
The preparation of two component series polyurethane prepolymer generally needs to mix two or more prepolymers before the reaction, and carry out crosslinking or reaction under certain conditions, such as adding catalysts, controlling temperature, pressurizing, etc. During the preparation process, attention should be paid to the selection and control of reaction conditions to ensure the controllability of the reaction and the stability of the polymer.

Details about two component series polyurethane prepolymer are as follows:
|
Model |
30A/B |
60A/B |
80A/B |
93A/B |
|
|
State of matter at 20°C |
A |
yellow transparent liquid |
|||
|
B |
colorless transparent liquid |
||||
|
The mixing ratio(A:B) |
1:1 |
||||
|
mixing temperature(℃) |
35-50 |
||||
|
Viscosity at 50°C(mpa·s) |
A |
300 |
400 |
500 |
800 |
|
B |
900 |
800 |
700 |
500 |
|
|
Gel time (min) |
50 |
30 |
10 |
3 |
|
|
Post curing time (100℃/h) |
12 |
12 |
6 |
6 |
|
|
Hardness (Shore A) |
30±2 |
60±2 |
80±2 |
93±2 |
|
|
Tensile strength (mpa) |
3 |
7 |
16 |
30 |
|
|
100% modulus stress (mpa) |
0.5 |
2 |
4 |
8 |
|
|
300% modulus stress (mpa) |
1.5 |
3 |
8 |
15 |
|
|
Elongation at break (%) |
700 |
500 |
450 |
450 |
|
|
Right Angle Tear Strength (kN/m) |
5 |
12 |
40 |
85 |
|
|
Rebound (%) |
60 |
50 |
40 |
35 |
|
|
Density at 25°C (g/cm3) |
1.10 |
1.11 |
1.12 |
1.15 |
|
Why choose us?
- We understand the importance of quality in our manufacturing process.
- Our company's Two Component Series Polyurethane Prepolymer have gone through regular and irregular inspection, products are up to or exceed national standards or industry standards.
- Our products are designed with the end-user in mind.
- Our Two Component Series Polyurethane Prepolymer incorporates years of industry experience and industry application knowledge, thus has a superior performance and stability.
- We work closely with our customers to ensure that their needs are met.
- Our company has advanced equipment, has a group of experienced, high-quality, enterprising management and business elite, as well as a professional quality workers.
- We work closely with our clients to ensure they get the best possible value from our products.
- We insist on technological innovation and intelligent manufacturing of two-wheel drive, and continue to develop new Two Component Series Polyurethane Prepolymer.
- We are committed to continuous improvement in all aspects of our business.
- The introduction of the most advanced technical equipment at present has greatly improved the production stability, making our Two Component Series Polyurethane Prepolymer more effective and quality guaranteed.











