Pump head assembly and parts: valve body, valve seat, valve rubber, plunger and packing, etc. Steel parts: We use raw materials from well-known steel factories (8620H, 18Cr, etc.). Seals: independent research and development and production, thus ensuring the high quality of valve body assembly products. Next, let's learn about the hydraulic end accessories of fracturing pumps with Xinruituo.
Valve body:
The valve body is a consumable item when the pressure pump is working. Its quality directly affects whether the equipment can work continuously and the labor intensity of pump workers on site. The product must have both high strength and good toughness. The working environment requires not only high pressure resistance, impact resistance but also acid and alkali resistance.
Valve seat:
The valve seat is a consumable item when the pressure pump is working. Based on the requirements of the construction environment, our company has developed two kinds of valve seats: high pressure resistant valve seat and acid resistant valve seat. The products have been widely recognized by users and exported to many well-known fracturing construction units at home and abroad.
Polyurethane valve seal:
Polyurethane valve rubber is a consumable item when the pressure pump is working. Based on the requirements of the construction environment, our valve rubber has developed three types of valve rubber: high pressure resistant type, acid resistant type and medium and low pressure type. The products have been widely recognized by users and exported to many well-known fracturing construction units at home and abroad.
Plunger packing:
The product is suitable for environmental cementing, fracturing, acidizing and other working conditions.
Packing type:
1. Ordinary packing: suitable for unconventional oil and gas fracturing and conventional oil well fracturing. Fracturing fluid is slightly acidic (the percentage of hydrochloric acid solution is less than 10%) or neutral liquid.
2. Acid-resistant packing: suitable for unconventional oil and gas fracturing and conventional acid fracturing. The fracturing fluid is a strong acid (the percentage of hydrochloric acid solution is less than 31%) or conventional oil well acidizing fluid.
Gland seal:
The gland seal is the sealing component on the hydraulic end gland of the pressure pump. The level of product performance directly affects the construction efficiency.
The above is what Xinruituo sorted out and shared about the hydraulic end accessories of fracturing pumps. If you want to know more relevant information, please continue to pay attention.
